論文發表情況描述

Ⅰ 什麼是論文成果形式描述

本文主要用於科學技術研究及其成果的描述，是研究成果的體現。 此一般結構用於促進結果和信息交換。 結果形式（包括論文，專著，翻譯，教科書，獎項）。 一般描述為「名稱」，「出版出版物（包括重印情況），出版情況」，「發布時間」，「字數（千字）」，「簽名案」。

畢業論文是專科及以上學歷教育為對本專業學生集中進行科學研究訓練而要求學生在畢業前撰寫的論文。一般安排在修業的最後一學年（學期）進行。

(1)論文發表情況描述擴展閱讀

不同類型的論文適用於不同發表需求的作者，一般來說，職稱論文依舊是發表需求最大的一類論文，晉升職稱是很多職場人士的目標，而隨著競爭的激烈，發表高水平的職稱論文是越來越多的作者的需求。

因此，發表職稱論文競爭也是比較激烈的，尤其核心期刊這種級別水平的刊物，熱門刊物等到發表的文章可能已經排到了明年。

一些專業度比較高的普刊也是需要排隊發表的，只不過需要等待的時間短一些，因此職稱論文也好，發表畢業論文也好，作者需要做的就是盡早准備發表工作，不要因為時間的把握影響晉升和畢業。

Ⅱ 丁華鋒的論文發表情況

[1] Huafeng Ding*, Weijuan Yang, Peng Huang, Andrés Kecskeméthy, Automatic Structural Synthesis of Planar Multiple Joint Kinematic Chains. ASME Journal of Mechanical Design, 2013, 135(9): 091007-1-12. （、EI檢索）
[2] Huafeng Ding*, Peng Huang, Jingfang Liu, Andrés Kecskeméthy, Automatic Structural Synthesis of the Whole Family of Planar 3-DOF Closed Loop Mechanisms. ASME Journal of Mechanisms and Robotics, 2013, 5(4): 041006-1-10. （SCI、EI檢索）
[3] Huafeng Ding*, Bin Zi, Peng Huang, Andrés Kecskeméthy, Zhen Huang. The Whole Family of Kinematic Structures for Planar 2- and 3-DOF Fractionated Kinematic Chains.Mechanism and Machine Theory, 2013, 70: 74-90.（SCI、EI檢索）
[4] Wenao Cao, Huafeng Ding*, Bin Zi, Zimin Cheng. New Structural Representation and Digital-design Platform for Symmetrical Parallel Mechanisms, 2013, International Journal of Advanced Robotic Systems, 2013, 207(10): 1-11.（SCI、EI檢索）
[5] Huafeng Ding*, Weijuan Yang, Peng Huang, Li Ma, Andrés Kecskeméthy, Zhen Huang (2013): Automatic Synthesis of Planar Multiple Joint Kinematic Chains. ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, August 4-7, 2013, Portland, OREGON, USA, DETC2013-12915. （EI檢索）
[6] Huafeng Ding*, Wenao Cao, Zimin Cheng, Shipei Zhao, Zhen Huang (2013): Automatic Analysis for the Full-Cycle Mobility of Parallel Mechanisms. ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, August 4-7, 2013, Portland, OREGON, USA, DETC2013-12923. （EI檢索）
[7] Zimin Cheng, Huafeng Ding, Wenao Cao, Zhen Huang (2013): Axodes Analysis of the Multi DOF Parallel Mechanisms and Parasitic Motion. ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, August 4-7, 2013, Portland, OREGON, USA, DETC2013-12838. （EI檢索）
[8] Huafeng Ding*, Fengmao Hou, Andrés Kecskeméthy, Zhen Huang. Synthesis of the Whole Family of Planar 1-DOF Kinematic Chains and Creation of their Atlas Databases.Mechanism and Machine Theory, 2012, 47(1): 1-15. （SCI、EI檢索）
[9] Huafeng Ding*, Wenao Cao, Andrés Kecskeméthy, Zhen Huang, Complete Atlas Database of 2-DOF Kinematic Chains and Creative Design of Mechanisms, ASME Journal of Mechanical Design, 2012, 134(3): 0310061-03100610.（SCI、EI檢索）
[10] Huafeng Ding*, Peng Huang, Bin Zi, Andrés Kecskeméthy, Automatic Synthesis of Kinematic Structures of Mechanisms and Robots Especially for those with Complex Structures, Applied Mathematical Modelling, 2012, 36(12): 6122-6131. （SCI、EI檢索）
[11] Bin Zi, Sen Qian, Huafeng Ding, Andrés Kecskeméthy, Design and analysis of cooperative cable parallel manipulators for multiple mobile cranes, International Journal of Advanced Robotic Systems, 2012, 9, 207: 1-10. （SCI、EI檢索）
[12] Shuxian Xia, Huafeng Ding, Andrés Kecskeméthy. A Loop-Based Approach for Rigid Subchain Identification in Spatial Mechanisms. Advanced Robotic Kinematics, 2012,Accepted.
[13] Huafeng Ding*, Fengmao Hou, Andrés Kecskeméthy, Zhen Huang. Synthesis of a Complete Set of Contracted Graphs for Planar Non-Fractionated Simple-Jointed Kinematic chains with All Possible DOFs. Mechanism and Machine Theory, 2011, 46(11):1588-1600. （SCI、EI檢索）
[14] Huafeng Ding*, Andrés Kecskeméthy, Zhen Huang (2011): Atlas Database of 2-DOF Kinematic Chains and its Application to the Creative Design of Mechanisms. ASME 2011 International Design Engineering Technical Conference & Computer and Information in Engineering Conference, August 28-31, 2011, Washington, DC, USA, DETC2011- 47264. （EI檢索）
[15] Shuxian Xia, Huafeng Ding, Andrés Kecskeméthy (2011): Rigid Sub chain Identification of Multi-Loop Kinematic Chains with the Method of Kinematical Transformers. Kolloquium Getriebetechnik, September 07-09, 2011, Chemnitz, Germany.
[16] Huafeng Ding*, Jing Zhao, Zhen Huang. Unified Structural Synthesis of Planar Simple and Multiple Joint Kinematic Chains. Mechanism and Machine Theory, 2010, 45(4):555-568.（SCI、EI檢索）
[17] Huafeng Ding*, Jing Zhao, Zhen Huang. The establishment of edge-based loop algebra theory of kinematic chains and its applications. Engineering with Computers, 2010, 26(2): 119-127. （SCI、EI檢索）
[18] Huafeng Ding*, Jing Zhao, Zhen Huang, Unified topological representation models of planar kinematic chains, ASME Journal of Mechanical Design, 2009, 131(11): 114503.（SCI、EI檢索）
[19] Huafeng Ding*, Zhen Huang. Isomorphism Identification of Graphs: Especially for the Graphs of Kinematic Chains. Mechanism and Machine Theory, 2009, 44(1):122-139. （SCI、EI檢索）
[20] Huafeng Ding*, Jing Zhao, Zhen Huang. (2009): The Establishment of Novel Structure Representation Models for Several Kinds of Mechanisms. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, San Diego, California, USA, 2009, DETC2009-86074. （EI檢索）
[21] Huafeng Ding*, Jing Zhao, Zhen Huang. (2009): Computer-aided Edge Loop Theory of Kinematic Structure of Mechanisms and Its Applications. ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, San Diego, California, USA, 2009, DETC2009-86073. （EI檢索）
[22] Huafeng Ding*, Zhen Huang. Loop Theory and Applications to Some Key Problems of Kinematic Structure of Kinematic Chains. Frontiers of Mechanical Engineering in China, Higher Ecation Press and Springer-Verlag, 2009, 4(3):276-283.
[23] 丁華鋒, 黃真. 平面機構統一拓撲描述模型的建立及其同構判別. 機械工程學報, 2009, 45(3):99-103.（EI檢索）
[24] Huafeng Ding*, Zhen Huang, Dejun Mu. Computer-aided Structure Decomposition Theory of Kinematic Chains and Its Applications. Mechanism and Machine Theory, 2008, 43(12):1596-1609. （SCI、EI檢索）
[25] Huafeng Ding*, Zhen Huang. Loop Theory of Kinematic Chains and Its Application to Essential Problems of Mechanism Topology. Proceedings of the 8th International Conference on Frontiers of Design and Manufacturing, Sept. 23~26, 2008, Tianjin, China.
[26] Huafeng Ding*, Zhen Huang. A New Theory for the Topological Structure Analysis of Kinematic Chains and Its Applications. Mechanism and Machine Theory, 2007, 42(10):1264-1279. （SCI、EI檢索）
[27] Huafeng Ding*, Zhen Huang. The Establishment of the Canonical Perimeter Topological Graph of Kinematic Chains and Isomorphism Identification. ASME Journal of Mechanical Design, 2007, 129(9): 915-923. （SCI、EI檢索）
[28] Huafeng Ding*, Zhen Huang. A Unique Representation of the Kinematic Chain and the Atlas Database. Mechanism and Machine Theory, 2007, 42(6):637-651. （SCI、EI檢索）
[29] Sijun Zhu, Zhen Huang, Huafeng Ding. Forward /Reverse Velocity and Acceleration Analysis for a Class of Lower-Mobility Parallel Mechanisms. ASME Journal of Mechanical Design, 2007, 129(4):390-396. （SCI、EI檢索）
[30] Zhen Huang, Huafeng Ding. Theory of Loop Algebra on Multi-Loop Kinematic Chains and Its Application. Science in China, 2007, 50(4):437-447. （SCI、EI檢索）
[31] 丁華鋒, 黃真. 基於環路特性的運動鏈拓撲圖及特徵描述的計算機自動生成. 機械工程學報, 2007, 43(11):40-44. （EI檢索）
[32] Huafeng Ding*, Zhen Huang. A Unique Matrix Representation for the Kinematic Chain. In: Proceedings of the 12th IFToMM World Congress in Mechanism and Machine Science, June 17-21, 2007, Besançon, French.
[33] Huafeng Ding*, Zhen Huang. Loop-Structure Decomposition of Kinematic Chains, Application to Rigid Sub-Chain Detection. ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, USA, 2007, MECH-34147. （EI檢索）
[34] Huafeng Ding*, Zhen Huang. Isomorphism Identification of Graphs of Kinematic Chains.ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Las Vegas, Nevada, USA, 2007, MECH-34148. （EI檢索）
[35] Yi Cao, Zhen Huang, Huafeng Ding. Property identification of singularity loci of Gough-Stewart manipulator. Chinese Journal of Mechanical Engineering (English Edition), 2006, 19(1):41-44（EI檢索）
[36] 丁華鋒, 黃真, 曹毅. 基於運動鏈特徵描述代碼的拓撲圖自動生成及其圖譜庫的建立. 機械工程學報,2006, 42(4):32-36（EI檢索）
[37] Cao, Yi, Zhang Qiuju, Zhou Hui and Ding Huafeng. Orientation-Workspace Analysis of the Stewart-Gough Manipulator. Proceedings of the International Conference on Sensing, Computing and Automation, Chongqing, China, Watam Press, May 8-11, 2006, 646-652.
[38] Zhen Huang, Huafeng Ding, Yi Cao. The Novel Characteristic Representations of Kinematic Chains and Their Applications. Proceedings of IDETC/CIE 2005: ASME 2005 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, Long Beach, California, USA,2005, MECH-84282 （EI檢索）
[39] Huafeng Ding, Zhen Huang, Yi Cao. The Systemic Research on Loop Characteristics of Kinematic Chains and Its Applications. Proceedings of IDETC/CIE 2005: ASME 2005 International Design Engineering Technical Conference & Computers and Information in Engineering Conference, Long Beach, California, USA,2005, MECH-84283 （EI檢索）

Ⅲ 總結中怎麼介紹自己的發表的論文

講講前人做過哪些方面的貢獻，自己在前人的基礎上做了哪些方面的研究，同時有哪些方面的缺點等等，基本就是這個思路的，具體的可以看我的頭，像的，或者是搜 心，裁，代，寫 就可以找到的

Ⅳ 論文發表情況怎麼填

把自己曾經發表過被收錄的文章蹭蹭蹭的網里邊填呀，早發表現在是我們學生群體投稿比較多的一種選擇。

Ⅳ 應屆生論文發表情況怎麼填

大學期間發過就是發過，填上刊物刊期和題目，沒發過就寫無

Ⅵ 論文成果形式的描述怎麼寫

論文主要用於科學技術研究及其成果的描述，是研究成果的體現。運用這種通用的結構形式來進行成果推廣、信息交流等。

成果形式(包括：論文,專著,譯著,教材,獲獎)的一般描述："名稱","發表刊物(含轉載情況),出版情況","發表時間","字數 (千字)","署名 情況","

Ⅶ 招聘表中論文發表情況一欄怎麼寫

你有發表過期刊論文嗎？沒有的話，那就不用填寫，有的話，你就可以填寫你安排的刊物情況三

Ⅷ 攻讀學位期間論文發表情況怎麼寫

這里主要是把你在攻讀學位期間發表的論文再論文的後面附錄中羅列出來就可以。
注意需要按照文獻的格式著名發表的期刊或雜志、日期等

Ⅸ 什麼叫做「論文發表情況」

就是是否有發表過論文或和別人合作發表過。有的話把發表的論文列上即可

Ⅹ 論文情況是什麼意思

就是你發表論文的詳細情況，應該像參考文獻一樣列出來。